Traceroute Trace the IPv4 route to a device on the network. Show Display switch operation information. Services Display parameters for the services module. Ping6 Send IPv6 ping request(s) to a device on the network. Ping Send IPv4 ping request(s) to a device on the network. Menu Change console user interface to menu system. Logout Terminate this console/telnet session. Link-test Test the connection to a MAC address on the LAN.

(For more on the startup-config and running config files, see Chapter 5, 'Switch Memory and Configuration'.)Ĭhassislocate Control the chassis locate led.ĭir Display a list of the files and subdirectories in aĭisplay Display current system information.Įxit Return to the previous context or terminate currentĬonsole/telnet session if you are in the Operator If you subsequently execute write memory in the CLI, then the switch also stores ' Y' as the IP address for VLAN 1 in the startup-config file. For example if you use the menu interface to configure an IP address of ' X' for VLAN 1 and later use the CLI to configure a different IP address of ' Y' for VLAN 1, then ' Y' replaces ' X' as the IP address for VLAN 1 in the running-config file. Regardless of which interface is used (CLI, menu interface, or WebAgent), the most recently configured version of a parameter setting overrides any earlier settings for that parameter. That is, if you are at the Operator level in the menu and select the Command Line Interface (CLI) option from the Main Menu, the CLI prompt appears at the Operator level.Ĭhanging parameter settings. When moving between interfaces, the switch retains the current privilege level (Manager or Operator). Moving between the CLI and the Menu interface.

Enable port brocade san switch